Views: 118 Author: Site Editor Publish Time: 2024-12-23 Origin: Site
After each use of the beach umbrella, you should first gently shake off the sand, dust and debris on the umbrella. This is the most basic maintenance step, because if these particulate matter adheres to the umbrella for a long time, it may cause wear and tear on the umbrella in the wind and rain or when folded for storage. At the same time, check whether the ribs of the umbrella are bent or damaged. If you find that the ribs of the umbrella are slightly deformed, you can try to manually restore them to their original shape, but be careful with force to avoid further damage.
Although beach umbrellas are mainly used outdoors, long-term exposure to the sun will cause the color of the umbrella to fade and the material to age. Try to store the beach umbrella when not in use, or place it in a place with sunshade facilities, such as under an awning or in the shade of a large parasol.
For sudden rainfall, if the beach umbrella gets wet, it should be dried as soon as possible after the rain stops, because a humid environment is prone to mold growth, especially for the joints between the umbrella surface and the ribs, and the growth of mold may cause damage to the components.
The cleaning methods for beach umbrellas made of different materials are different. Common umbrella materials include polyester, dacron and cotton. Polyester and dacron beach umbrellas are generally more durable and relatively resistant to stains; while cotton umbrellas are softer in texture, but more easily stained, and may take longer to dry after cleaning.
2. The main materials of umbrella ribs are aluminum alloy, wood and steel. Aluminum alloy ribs are light and corrosion-resistant, wooden ribs have natural and beautiful characteristics, but need to be protected from moisture, and steel ribs are relatively strong but easy to rust.
Prepare appropriate cleaning tools according to the material of the beach umbrella and the degree of stains. For light stains, a clean, soft damp cloth or sponge is sufficient. If the stains are stubborn, you may need to prepare a mild detergent (such as a neutral laundry detergent or a special fabric cleaner), a soft brush (such as a toothbrush), a bucket, etc. In addition, prepare a clean towel for absorbing moisture and wiping.
For small stains on the umbrella, such as sunscreen, food residue or bird droppings, first use a damp cloth or sponge with a small amount of clean water to gently wipe the stained area. If the stain is not wiped off, add a small amount of detergent to the damp cloth and wipe again. Be careful not to use excessive force to avoid damaging the umbrella.
1. If the umbrella is dirty, it needs to be cleaned thoroughly. Add an appropriate amount of warm water and detergent to a bucket and stir well. Soak the umbrella in the water, but do not soak the ribs in water for a long time, as this may cause damage to the ribs.
2. The soaking time depends on the stubbornness of the stain, usually 10-15 minutes. Then use a soft brush to gently scrub the umbrella, paying attention to scrubbing from the edge of the umbrella to the center, so as to prevent the stain from spreading. After scrubbing, rinse the umbrella thoroughly with clean water to ensure that there is no detergent residue.
After cleaning, the umbrella surface contains a lot of moisture and cannot be stored directly. Use a clean towel to gently squeeze or absorb the moisture on the umbrella surface to minimize the amount of moisture remaining. Then open the beach umbrella and place it in a well-ventilated place away from direct sunlight to dry.
Aluminum alloy ribs are relatively easy to clean. Wipe the surface of the ribs with a damp cloth to remove dust and stains. If slight oxidation is found (white spots on the surface), mix white vinegar and water in a 1:1 ratio, dip a soft cloth in the mixture and wipe the oxidized area, then rinse with clean water and finally wipe dry with a dry cloth.
Be extra careful when cleaning wooden ribs. First, use a soft brush to sweep away the dust on the surface. If there are stains, use a small amount of mild soapy water (dissolve soap in water to make a soapy water solution) on a soft cloth and gently wipe the stained area. After wiping, use a clean dry cloth to immediately absorb the moisture to prevent moisture from penetrating into the wood and causing deformation. Apply a layer of wood wax oil to the wooden ribs regularly to effectively protect the wood and make it more durable.
Steel ribs are prone to rust, so take anti-rust measures after cleaning. Use a damp cloth and a wire brush (for stubborn rust) to clean the rust and stains on the surface of the ribs. After cleaning, wipe them thoroughly with a dry cloth, and then apply a layer of anti-rust oil, such as sewing machine oil or a special metal anti-rust oil, to prevent rust.
After cleaning, carefully check the umbrella to see if there are any damages, tears or split lines. Check if the ribs can open and close normally and if the connections between the various parts are firm. If any damage is found, repair or replace the parts in time.
When the beach umbrella is completely dry, store it in the correct way. If it is a foldable beach umbrella, fold it according to the steps in the instructions and put it in the umbrella cover. For non-foldable beach umbrellas, you can tie it up with ropes or special storage belts and store it in a dry and ventilated place to prevent the umbrella and ribs from being squeezed and damaged.
If you want to know more about outdoor furniture , welcome to contact us !
